مصالح و سازه های بتنی

مصالح و سازه های بتنی

بررسی هم افزایی تاثیر عمل آوری، سطح اتصال و مصالح ترمیمی در بهبود مقاومت برشی مقاطع بتنی مورد ترمیم با استفاده از ملات ژئوپلیمری اصلاح شده

نوع مقاله : مقاله پژوهشی

نویسندگان
1 دانشجوی دکترا، گروه عمران، دانشگاه آزاد اسلامی، واحد نور، نور، ایران
2 استادیار گروه عمران، دانشگاه ازاد اسلامی، واحد نور، نور، ایران
3 دانشیار گروه عمران، دانشگاه مازندران، بابلسر، ایران
4 استادیار گروه عمران، دانشگاه آزاد اسلامی، واحد نور، نور، ایران
چکیده
یکی از چالش‌های اصلی در زمینه ترمیم و بازسازی مقاطع آسیب‌دیده بتن، ایجاد اتصال مناسب و پایدار میان بتن قدیم و ملات ترمیمی جدید است؛ اتصالی که تحت تأثیر عوامل متعددی از جمله ویژگی‌های سطح مشترک، شرایط عمل‌آوری و ترکیب ماده ترمیمی قرار می‌گیرد. در این پژوهش، هم‌افزایی تأثیر شرایط عمل‌آوری و نوع آماده‌سازی سطح اتصال در بهبود عملکرد ترمیمی مقاطع آسیب‌دیده بتن با استفاده از ملات ترمیمی ژئوپلیمری اصلاح‌شده مورد بررسی آزمایشگاهی قرار گرفته است. برای این منظور، ملات‌های ترمیمی ژئوپلیمری مبتنی بر سرباره کوره آهنگدازی و میکروسیلیس تهیه و به‌منظور بهبود ویژگی‌های مکانیکی و چسبندگی، با افزودنی‌هایی شامل الیاف فولادی، چسب لاتکس و سولفا‌آلومینا اصلاح شدند. در این مطالعه، سه نوع سطح اتصال شامل سطح ساده، سطح شیاردار و سطح شیاردار همراه با برس‌زنی به‌عنوان روش‌های مختلف آماده‌سازی بستر بتن قدیم در نظر گرفته شد. همچنین، نمونه‌ها تحت سه شرایط عمل‌آوری شامل دمای محیط آزمایشگاه، عمل‌آوری در آب گرم با دمای 30 درجه سانتی‌گراد و عمل‌آوری در آون با دمای 60 درجه سانتی‌گراد قرار گرفتند تا اثر رژیم‌های مختلف عمل‌آوری بر رفتار پیوستگی ناحیه ترمیم‌شده بررسی شود. نتایج حاصل نشان داد که نوع آماده‌سازی سطح اتصال و شرایط عمل‌آوری، هر دو نقش تعیین‌کننده‌ای در بهبود مقاومت پیوستگی و کارایی سیستم ترمیمی دارند. به‌طور کلی، زبرسازی و شیارزنی سطح بستر، به‌ویژه در ترکیب با برس‌زنی، موجب بهبود درگیری مکانیکی و افزایش چسبندگی در ناحیه اتصال شده و عملکرد ملات ترمیمی ژئوپلیمری را ارتقا داده است. همچنین، اعمال شرایط عمل‌آوری مناسب سبب تسریع و تکمیل واکنش‌های ژئوپلیمریزاسیون و در نتیجه افزایش انسجام ساختاری و مقاومت ناحیه ترمیم‌شده شده است. در مجموع، یافته‌های این پژوهش نشان می‌دهد که دستیابی به یک ترمیم موفق و بادوام در اعضای بتنی آسیب‌دیده، صرفاً وابسته به انتخاب یک ملات ترمیمی مناسب نیست، بلکه به‌طور هم‌زمان نیازمند طراحی صحیح شرایط عمل‌آوری و آماده‌سازی اصولی سطح مشترک بتن قدیم و جدید است. از این‌رو، ملات ترمیمی ژئوپلیمری اصلاح‌شده، در صورت همراهی با آماده‌سازی مناسب سطح و عمل‌آوری کنترل‌شده، می‌تواند به‌عنوان گزینه‌ای کارآمد و پایدار برای ترمیم سازه‌های بتنی مورد استفاده قرار گیرد.
کلیدواژه‌ها
موضوعات

عنوان مقاله English

Investigation of the Synergistic Effects of Curing, Bond Interface, and Repair Materials on Improving the Shear Strength of Repaired Concrete Sections Using Modified Geopolymer Mortar

نویسندگان English

Gholamreza Ahmadi 1
Sepideh Rahimi 2
Habib Akbarzadeh Bangar 3
Mohammad Hossein Zade 4
1 PhD candidate, Department of Civil Engineering, NO.C., Islamic Azad University, Noor, Iran
2 Department of civil engineering, No. C., Islamic azad university, Nour, iran
3 Department of Civil Engineering, Faculty of Engineering and Technology, University of Mazandaran, Babolsar 47416-13534, Iran
4 Department of Civil Engineering, NO.C., Islamic Azad University, Noor, Iran
چکیده English

One of the main challenges in the field of repair and reconstruction of damaged concrete sections is to create a suitable and stable bond between old concrete and new repair mortar; a bond that is affected by several factors, including the characteristics of the interface, curing conditions, and composition of the repair material. In this study, the synergistic effect of curing conditions and the type of surface preparation of the bond in improving the repair performance of damaged concrete sections using modified geopolymer repair mortars has been investigated in the laboratory. For this purpose, geopolymer repair mortars based on blast furnace slag and microsilica were prepared and modified with additives including steel fibers, latex adhesive, and sulfa alumina to improve mechanical properties and adhesion. In this study, three types of bond surfaces, including plain surface, grooved surface, and grooved surface with brushing, were considered as different methods of preparing the old concrete substrate. Also, the samples were subjected to three curing conditions including laboratory temperature, hot water curing at 30°C and oven curing at 60°C to investigate the effect of different curing regimes on the bond behavior of the repaired area. The results showed that the type of bonding surface preparation and curing conditions both play a decisive role in improving the bond strength and efficiency of the repair system. In general, roughening and grooving of the substrate surface, especially in combination with brushing, improved mechanical engagement and increased adhesion in the bonded area and enhanced the performance of the geopolymer repair mortar. Also, applying appropriate curing conditions accelerated and completed geopolymerization reactions, resulting in increased structural integrity and strength of the repaired area. Overall, the findings of this study indicate that achieving a successful and durable repair of damaged concrete members does not solely depend on the selection of a suitable repair mortar, but also requires the correct design of curing conditions and proper preparation of the interface between old and new concrete. Therefore, modified geopolymer repair mortar, when accompanied by appropriate surface preparation and controlled curing, can be used as an efficient and sustainable option for the repair of concrete structures.

کلیدواژه‌ها English

Modified geopolymer mortar
iron furnace slag
latex adhesive
bond strength
bonding surface

  • تاریخ دریافت 23 شهریور 1405
  • تاریخ بازنگری 13 آبان 1405
  • تاریخ پذیرش 01 آذر 1405