نوع مقاله : مقاله پژوهشی
عنوان مقاله English
نویسندگان English
Concrete, as the most widely used construction material, undergoes deterioration when exposed to harsh and corrosive environments, such as acidic media and municipal wastewater, due to chemical and biological attacks. This study aimed to investigate the effect of zeolite and silica fume pozzolans on the durability of concrete under these corrosive conditions and to select the optimal mix design. To this end, 15 mix designs were prepared with zeolite replacement levels (20% and 25%) and silica fume levels (5% and 8%), using three water-to-cement ratios (0.35, 0.40, and 0.45). The specimens were exposed to three environments, normal, acidic
(5% sulfuric acid), and real municipal wastewater for 30, 60, and 90 days. The evaluations included compressive strength, Schmidt hammer, ultrasonic pulse velocity, and electrical resistivity tests. The results indicated that mixes containing 20% zeolite and 8% silica fume with a water-to-cement ratio of 0.35 exhibited the best performance; specifically, zeolite showed favorable behavior in the acidic environment, while silica fume performed well in the wastewater environment. However, increasing the water-to-cement ratio significantly diminished the benefits of both pozzolans. Microstructural evaluation using SEM and EDX also revealed that pozzolan-containing specimens, particularly silica fume in the acidic environment and zeolite in the wastewater environment, had a denser microstructure and fewer corrosion products than the control specimen, which is in good agreement with the mechanical and durability results. Ultimately, it was concluded that selecting the appropriate pozzolan based on environmental conditions serves as an effective strategy to enhance durability and promote sustainable development in the concrete industry.
کلیدواژهها English