مصالح و سازه های بتنی

مصالح و سازه های بتنی

اثر همزمان خاکستر بادی و نانولوله‌های کربنی بر خواص مهندسی بتن خودمتراکم

نوع مقاله : مقاله پژوهشی

نویسندگان
1 بخش مهندسی عمران، دانشکده فنی ومهندسی، دانشگاه شهید باهنر کرمان، کرمان، ایران.
2 بخش مهندسی عمران، دانشکده فنی و مهندسی، دانشگاه شهید باهنر کرمان
چکیده
پژوهش حاضر با هدف بررسی اثرات استفاده همزمان خاکستر بادی و نانولوله‌های کربنی بر خواص مهندسی بتن خودمتراکم و دستیابی به طرح اختلاط بهینه انجام شد. طراحی آزمایش‌ها با استفاده از روش سطح پاسخ و طرح مرکب مرکزی، در محدوده ۱۰ تا ۴۰ درصد خاکستر بادی و 02/0 تا 1/0 درصد نانولوله کربنی نسبت به وزن مواد چسباننده انجام گرفت. عیار مواد چسباننده 400 کیلوگرم بر متر مکعب و نسبت آب به مواد چسباننده ثابت و برابر 44/0 در نظر گرفته شد. بهترین طرح اختلاط مربوط به طرح C0.06-F25 (نقطه مرکزی با 5 تکرار) است که مقاومت فشاری ۷ روزه آن به طور میانگین معادل 53/1 ± 6/40، مقاومت فشاری ۲۸ روزه معادل 23/1 ± 38/59، مقاومت خمشی معادل 19/0 ± 83/6 مگاپاسکال و میزان جذب آب نهایی آن برابر با 1/0 ± 6/2 درصد خواهد بود. در نهایت، با هدف بیشینه‌سازی مقاومت‌های مکانیکی و کمینه‌سازی جذب آب، ترکیب بهینه پیش‌بینی‌شده توسط مدل معادل 64/19 درصد خاکستر بادی و 051/0 درصد نانولوله کربنی با شاخص مطلوبیت 914/0 تعیین شد. نتایج این پژوهش نشان می‌دهد که به‌کارگیری همزمان این دو ماده، می‌تواند راهکاری برای دستیابی به بتن‌ خودمتراکم با عملکرد و دوام مطلوب باشد.
کلیدواژه‌ها
موضوعات

عنوان مقاله English

The simultaneous effect of fly-ash and carbon nanotubes on the engineering properties of self-compacting concrete

نویسندگان English

Mohammd Anjomshoaa 1
Mohammad Javad Fadaee Fathabadi 2
Hamed Saffari 1
1 Department of Civil Engineering, Faculty of Engineering, Shahid Bahonar University of Kerman, Kerman, Iran.
2 Civil Engineering Department, Faculty of Engineering, Shahid Bahonar University of Kerman
چکیده English

This study aimed to investigate the effects of the simultaneous incorporation of fly ash and carbon nanotubes on the properties of self-compacting concrete (SCC) and to determine the optimal mix design. The experimental design was developed using the response surface methodology (RSM) and a central composite design (CCD), with fly ash contents ranging from 10% to 40% and carbon nanotube contents ranging from 0.02% to 0.1% by weight of the binder. The binder content was fixed at 400 kg/m³, and the water-to-binder ratio was maintained at 0.44. The best-performing mix design was identified as C0.06-F25, corresponding to the central point with five replicates. This mix exhibited an average 7-day compressive strength of 40.6 ± 1.53 MPa, a 28-day compressive strength of 59.38 ± 1.23 MPa, a flexural strength of 6.83 ± 0.19 MPa, and a final water absorption of 2.6 ± 0.1%. Finally, to maximize mechanical strength and minimize water absorption, the optimal mixture predicted by the model consisted of 19.64% fly ash and 0.051% carbon nanotubes, with a desirability index of 0.914. The results demonstrate that the simultaneous incorporation of fly ash and carbon nanotubes can provide an effective approach to producing self-compacting concrete with desirable performance and durability.

کلیدواژه‌ها English

Self-compacting concrete
Carbon nanotubes
Fly-ash
Response Surface Methodology

مقالات آماده انتشار، پذیرفته شده
انتشار آنلاین از 24 آبان 1405

  • تاریخ دریافت 07 شهریور 1405
  • تاریخ بازنگری 03 آبان 1405
  • تاریخ پذیرش 24 آبان 1405