[1] Pigeon, M., Marchand, J. and Pleau, R.) 1996(,“ Frost resistant concrete”. Construction and Building Materials, Vol 10(5), pp 339–48.
[2] Bentur, A and Mindess, S. (2006), “Fibre Reinforced Cementitious Composites”. by CRC Press, Second Edition.
[3] Fallah, S., and Nematzadeh, M. (2017), “Mechanical properties and durability of high-strength concrete containing macro-polymeric and polypropylene fibers with nano-silica and silica fume”, Construction and Building Materials, Vol 132, pp170–187.
[4] Soe, K.T., Zhang, Y. X., and Zhang, L. C. (2013), “Material properties of a new hybrid fibre-reinforced engineered cementitious composite”, Construction and Building Materials, Vol 43, pp 399-407.
[5] Halvaei, M., Jamshidi , M., Pakravan , H. R., and Latifi, M. (2015), “Interfacial bonding of fine aggregate concrete to low modulus fibers”, Construction and Building Materials, Vol 95, pp117-123.
[6] Banthia, N., and Gupta, R. (2004), “Hybrid fiber reinforced concrete (HyFRC): fiber synergy in high strength matrices. ”, Materials and Structures, Vol 37 (10),pp707-716.
[7] Banthia,N., and Soleimani,S.M. (2005), “Flexural response of hybrid fiber-reinforced cementitious composites. ”, ACI Materials journal, Vol 102(6 ), pp 382.
[8] Banthia, N., and Nandakumar , N. (2003), “Crack growth resistance of hybrid fiber reinforced cement composites”, Cement and Concrete Composites, Vol 25(1), pp3-9.
[9] Monteiro, P.(2006), “Concrete: Microstructure, Properties, and Materials”, McGraw-Hill Publishig.
[10] Hwang, C.L., Tran,V.A., Hong, J.W., Hsieh, Y.C. (2016), “Effects of short coconut fiber on the mechanical properties, plastic cracking behavior, and impact resistance of cementitious composites”, Construction and Building Materials, Vol 127, pp 984–992.
[11] ASTM C143 / C143M-15a, Standard Test Method for Slump of Hydraulic-Cement Concrete, ASTM International, West Conshohocken, PA, 2015,
www.astm.org.
[12] ASTM C231 / C231M-17a, Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method, ASTM International, West Conshohocken, PA, 2017,
www.astm.org .
[13] BS 1881-116:1983, Testing Concrete Part 116:Method for determination of compressive strength of concrete cubes, AMD 6097: July 1989; AMD 6720: July 1991.
[14] ASTM C78-09, Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading), ASTM International, West Conshohocken, PA, 2009, www.astm.org.
[15] ASTM C1581 / C1581M-18a. (2018), “Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage”, ASTM International, West Conshohocken.
[16] Banthia, N. (2010), “Report on the Physical Properties and Durability of Fiber Reinforced Concrete”, ACI 544.5 R-10, Reported by ACI Committee 544 1–3.
)