1. Collepardi M. (2003). A state-of-the-art review on delayed ettringite attack on concrete. Cem Concr Compos, 25:401–407.
2. Drimalas T, Clement JC, Folliard KJ, Dhole R, Thomas MDA. (2011). Laboratory and Field Evaluations of External Sulfate Attack in Concrete
3. Mobasher B. (2007). Modeling of stiffness degradation and expansion in cement based materials subjected to external sulfate attack. Transp Prop Concr Qual Mater Sci Concr Am Ceram Soc Wiley Sons, New Jersey, 157–171.
4. Whittaker M, Black L. (2015). Current knowledge of external sulfate attack. Adv Cem Res, 27:532–545.
5. mida Hamida, H. AA. (2014). Modeling of Chloride Penetration in Concrete Structures in Cold Regions. J Adv Sci Appl Eng
6. Atkinson A, Haxby A, Hearne JA. (1988). The chemistry and expansion of limestone-Portland cement mortars exposed to sulphate containing solutions. United Kingdom Nirex
7. Santhanam M, Cohen MD, Olek J. (2003). Mechanism of sulfate attack: a fresh look: Part 2. Proposed mechanisms. Cem Concr Res, 33:341–346.
8. Rothstein D, Thomas JJ, Christensen BJ, Jennings HM. (2002). Solubility behavior of Ca-, S-, Al-, and Si-bearing solid phases in Portland cement pore solutions as a function of hydration time. Cem Concr Res, 32:1663–1671.
9. Lothenbach B, Winnefeld F. (2006). Thermodynamic modelling of the hydration of Portland cement. Cem Concr Res, 36:209–226.
10. Kunther W, Lothenbach B, Scrivener K. (2013). Influence of bicarbonate ions on the deterioration of mortar bars in sulfate solutions. Cem Concr Res, 44:77–86.
11. Lothenbach B, Bary B, Le Bescop P, Schmidt T, Leterrier N. (2010). Sulfate ingress in Portland cement. Cem Concr Res, 40:1211–1225.
12. Allahverdi A, Najafi kani I, Islamy namin H, Negar Khatun A. (2006). Quality evaluation of Esfahan Steel slag to produce slag cement. Elev Natl Congr Chem Eng Iran, Tehran, Tarbiat Modarres Univ
13. Kulik D, Berner U, Curti E. (2003). Modelling chemical equilibrium partitioning with the GEMS-PSI code. PSI Sci Rep, 4:109–122.
14. Lothenbach B. (2010). Thermodynamic equilibrium calculations in cementitious systems. Mater Struct, 43:1413–1433.
15. Babushkin V, Matveyev G, Mchedlov-Petrossyan O. (1985). Thermodynamics of silicates. Springer, Berlin
16. Thoenen T, Hummel W, Berner U, Curti E. (2014). The PSI/Nagra Chemical Thermodynamic Database 12/07
17. Piasta W, Marczewska J, Jaworska M. (2014). Some aspects and mechanisms of sulphate attack. Struct Environ, 6:19–24.
18. Kunther W. (2012). Investigation of sulfate attack by experimental and thermodynamic means
19. ASTM C-989, 1994. Standard specification for ground granulated blast furnace slag for use in concrete and mortars. Annual Book of ASTM Standards.
20. Odler I. (2000). Special Inorganic Cements. E and FN Spon
21. Mangat PS, El-Khatib JM. (1992). Influence of initial curing on sulphate resistance of blended cement concrete. Cem Concr Res, 22:1089–1100.
22. Gollop RS, Taylor HFW. (1996). Microstructural and microanalytical studies of sulfate attack. V. Comparison of different slag blends. Cem Concr Res, 26:1029–1044.