Hassan HS, Abdel-Gawwad H, Vásquez-García S, Israde-Alcántara I, Flores-Ramirez N, Rico J, Mohammed MS (2019). Cleaner production of one-part white geopolymer cement using pre-treated wood biomass ash and diatomite. Journal of Cleaner Production 209:1420-1428.
 Kocak Y, Tascı E, Kaya U (2013). The effect of using natural zeolite on the properties and hydration characteristics of blended cements. Construction and Building Materials 47:720-727.
 Metz B, Davidson O, De Coninck H (2005) Carbon dioxide capture and storage: special report of the intergovernmental panel on climate change. Cambridge University Press.
 Taylor M, Tam C, Gielen D (2006). Energy efficiency and CO2 emissions from the global cement industry. Korea 50 (2.2):61.67.
 Yang K-H, Song J-K, Song K-I (2013). Assessment of CO2 reduction of alkali-activated concrete. Journal of Cleaner Production 39:265-272.
 Ávalos-Rendón TL, Chelala EAP, Escobedo CJM, Figueroa IA, Lara VH, Palacios-Romero LM (2018). Synthesis of belite cements at low temperature from silica fume and natural commercial zeolite. Materials Science and Engineering: B 229:79-85.
 Pacheco-Torgal F, Abdollahnejad Z, Camões A, Jamshidi M, Ding Y (2012). Durability of alkali-activated binders: a clear advantage over Portland cement or an unproven issue? Construction and Building Materials 30:400-405.
 Samimi K, Kamali-Bernard S, Maghsoudi AA, Maghsoudi M, Siad H (2017). Influence of pumice and zeolite on compressive strength, transport properties and resistance to chloride penetration of high strength self-compacting concretes. Construction and Building Materials 151:292-311.
 Khale D, Chaudhary R (2007). Mechanism of geopolymerization and factors influencing its development: a review. Journal of Materials Science 42 (3):729-746.
 Davidovits J (2008) Geopolymer chemistry and applications. Geopolymer Institute.
 Duxson P, Provis JL, Lukey GC, Van Deventer JS (2007). The role of inorganic polymer technology in the development of ‘green concrete’. Cement and Concrete Research 37 (12):1590-1597.
 Sarker PK (2009). Analysis of geopolymer concrete columns. Materials and Structures 42 (6):715-724.
 Pile P (2013). What is expanding PowerPile geopolymer pillar? PowerPile Pillars, Accessed November 26:2016.
 Shrestha P (2014). Development of geopolymer concrete for precast structures.
 Cristelo N, Glendinning S, Miranda T, Oliveira D, Silva R (2012). Soil stabilisation using alkaline activation of fly ash for self compacting rammed earth construction. Construction and Building Materials 36:727-735.
 Cristelo N, Glendinning S, Fernandes L, Pinto AT (2013). Effects of alkaline-activated fly ash and Portland cement on soft soil stabilisation. Acta Geotechnica 8 (4):395-405.
 Zhang M, Guo H, El-Korchi T, Zhang G, Tao M (2013). Experimental feasibility study of geopolymer as the next-generation soil stabilizer. Construction and Building Materials 47:1468-1478.
 Komljenović M, Baščarević Z, Bradić V (2010). Mechanical and microstructural properties of alkali-activated fly ash geopolymers. Journal of Hazardous Materials 181 (1-3):35-42.
 Tennakoon C, Nazari A, Sanjayan JG, Sagoe-Crentsil K (2014). Distribution of oxides in fly ash controls strength evolution of geopolymers. Construction and Building Materials 71:72-82.
 Xu H, Van Deventer J (2000). The geopolymerisation of alumino-silicate minerals. International Journal of Mineral Processing 59 (3):247-266.
 Hardjito D, Rangan BV (2005). Development and properties of low-calcium fly ash-based geopolymer concrete.
 Kong DL, Sanjayan JG (2008). Damage behavior of geopolymer composites exposed to elevated temperatures. Cement and Concrete Composites 30 (10):986-991.
 Al Bakri AMM, Kareem OAA, Myint S (2009). Study on the effect of alkaline activators ratio in preparation of fly ash-based geopolymer.
 Leong HY, Ong DEL, Sanjayan JG, Nazari A (2016). The effect of different Na2O and K2O ratios of alkali activator on compressive strength of fly ash based-geopolymer. Construction and Building Materials 106:500-511.
 Naderpour H, Nagai K, Fakharian P, Haji M (2019). Innovative models for prediction of compressive strength of FRP-confined circular reinforced concrete columns using soft computing methods. Composite Structures 215:69-84.
 Naderpour H, Nagai K, Haji M, Mirrashid M (2019). Adaptive neuro‐fuzzy inference modelling and sensitivity analysis for capacity estimation of fiber reinforced polymer‐strengthened circular reinforced concrete columns. Expert Systems:e12410.
 Naderpour H, Alavi S (2017). A proposed model to estimate shear contribution of FRP in strengthened RC beams in terms of Adaptive Neuro-Fuzzy Inference System. Composite Structures 170:215-227.
 Naderpour H, Mirrashid M, Nagai K (2019). An innovative approach for bond strength modeling in FRP strip-to-concrete joints using adaptive neuro–fuzzy inference system. Engineering with Computers:1-18.
 Naderpour H, Rafiean AH, Fakharian P (2018). Compressive strength prediction of environmentally friendly concrete using artificial neural networks. Journal of Building Engineering 16:213-219.
 Prasad BR, Eskandari H, Reddy BV (2009). Prediction of compressive strength of SCC and HPC with high volume fly ash using ANN. Construction and Building Materials 23 (1):117-128.
 Kooshkaki A, Eskandari-Naddaf H (2019). Effect of porosity on predicting compressive and flexural strength of cement mortar containing micro and nano-silica by multi-objective ANN modeling. Construction and Building Materials 212:176-191.
 Ahmadi M, Naderpour H, Kheyroddin A (2014). Utilization of artificial neural networks to prediction of the capacity of CCFT short columns subject to short term axial load. Archives of civil and mechanical engineering 14 (3):510-517.
 Naderpour H, Kheyroddin A, Amiri GG (2010). Prediction of FRP-confined compressive strength of concrete using artificial neural networks. Composite Structures 92 (12):2817-2829.
 Hosseini G (2017). Capacity Prediction of RC Beams Strengthened with FRP by Artificial Neural Networks Based on Genetic Algorithm. Journal of Soft Computing in Civil Engineering 1 (1):93-98.
 Mahdinia S, Eskandari-Naddaf H, Shadnia R (2019). Effect of cement strength class on the prediction of compressive strength of cement mortar using GEP method. Construction and Building Materials 198:27-41.
 Emamian SA, Eskandari-Naddaf H (2019). Effect of porosity on predicting compressive and flexural strength of cement mortar containing micro and nano-silica by ANN and GEP. Construction and Building Materials 218:8-27.
 Shahmansouri AA, Bengar HA, Jahani E (2019). Predicting compressive strength and electrical resistivity of eco-friendly concrete containing natural zeolite via GEP algorithm. Construction and Building Materials 229:116883.
 Ebtehaj I, Bonakdari H (2017). No-deposition sediment transport in sewers using gene expression programming. Journal of Soft Computing in Civil Engineering 1 (1):29-53.
 Fakharian P, Naderpour H, Haddad A, Rafiean A, Eidgahee D (2018). A proposed model for compressive strength prediction of FRP-confined rectangular column in terms of Genetic expression Programming (GEP). Concrete Research.
 Ferreira C (2006) Gene expression programming: mathematical modeling by an artificial intelligence, vol 21. Springer.
 Elhakam AA, Mohamed AE, Awad E (2012). Influence of self-healing, mixing method and adding silica fume on mechanical properties of recycled aggregates concrete. Construction and Building Materials 35:421-427.
 ASTM (2019) C618-19: Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. ASTM International, West Conshohocken, PA.
 ASTM (2013) C33-13: Standard Specification for Concrete Aggregates. ASTM International, Philadelphia, PA.
 ASTM (2015) C127-15: Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate. ASTM International, West Conshohocken, PA.
 ASTM (2015) C143-15a: Standard Test Method for Slump of Hydraulic-Cement Concrete. ASTM International, Philadelphia, PA.
 ASTM C192 / C192M - 18 (2018). Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory. ASTM International.
 BSI (2009) BS EN 12390-3: Testing hardened concrete - Part 3: Compressive strength of test specimens. British Standard Institution, London.
 Ferreira C (2001). Gene expression programming: a new adaptive algorithm for solving problems. arXiv preprint cs/0102027.
 Ferreira C (2002) Gene expression programming in problem solving. In: Soft Computing and Industry. Springer, pp 635-653.
 Ferreira C (2006) Automatically defined functions in gene expression programming. In: Genetic Systems Programming. Springer, pp 21-56.
 Yang K-H, Cho A-R, Song J-K, Nam S-H (2012). Hydration products and strength development of calcium hydroxide-based alkali-activated slag mortars. Construction and Building Materials 29:410-419.
 Bakharev T, Sanjayan JG, Cheng Y-B (1999). Alkali activation of Australian slag cements. Cement and Concrete Research 29 (1):113-120.