@article { author = {Mohammadian, Milad and Shafei, Erfan and Mokari, Javad}, title = {Shock-Aftershock Effect Analysis for Seismic Performance Evaluation of RC moment Frames}, journal = {Journal of Concrete Structures and Materials}, volume = {3}, number = {2}, pages = {41-64}, year = {2018}, publisher = {Iranian Concrete Society}, issn = {2538-5828}, eissn = {2676-5969}, doi = {10.30478/jcsm.2019.82169}, abstract = {Sequential quakes as shock-aftershocks result in nonlinear response of buildings and in many cases lead to severe destruction such as accumulative structural damages in compare to single shock quakes. In current study, the shock-aftershock sequence effect on the nonlinear seismic performance of reinforced concrete (RC) moment frames is studied in detail. In this way, nonlinear numerical method is selected as the study approach and preliminary models are calibrated based on existing shake-table experiments. In advance, four-story and eight-story frames are modeled using flexibility-based finite element code and are subjected to quake sequences. Three types of seismic sequences are assumed for study: (1) single shock quakes; (2) similar shock-aftershock quakes; (3) dissimilar far field-near fault shock-aftershock quakes. Discussions are based on the maximum and residual inter-story drift ratios. Results reveal that the residual drifts are increased in seismic sequences. In addition, four-story frames experience higher maximum drift ratio than the eight-story frames during the aftershocks. The increase of residual drift ratio in more apparent for four-story frames than eight-story frames in the case of dissimilar seismic sequences. For all the assumed cases, top stories experience the highest values of maximum and residual drift ratios which show the sensitivity of top stories to the seismic sequence. Thus, the collapse probability of top stories is high during shock-aftershock sequences and needs to be considered in further seismic design.}, keywords = {Seismic Sequence,RC moment frame,Nonlinear Performance,Lateral Drift,Damage}, title_fa = {تحلیل اثر توالی لرزه و پس‌لرزه بر روی عملکرد لرزه‌ای قاب‌های خمشی بتنی مسلح}, abstract_fa = {زمین‌لرزه‌های پی‌درپی به شدت بر پاسخ غیرخطی سازه‌ها تاثیر می‌گذارند و در بسیاری از موارد اثرات نامطلوب بیشتری در مقایسه با زلزله‌های منفرد، مانند تجمع آسیب‌های سازه‌ای و غیرسازه‌ای دارند. هدف از این تحقیق، بررسی اثر توالی‌های لرزه‌ای مختلف بر روی عملکرد غیرخطی لرزه‌ای قاب‌های خمشی بتن مسلح است. برای این منظور، دو دسته قاب بتن مسلح چهار و هشت طبقه، توسط نرم‌افزار المان محدود مدل‌سازی و تحلیل دینامیکی غیرخطی شده است. این قاب‌ها توسط هشت دسته زلزله از جمله کجائلی، چی‌چی‌، لندرز‌، نورثریج، امپریال‌والی، هولیستر، کوبه و فریولی تحت اثر سه حالت مختلف بارگذاری زلزله قرار داده می‌شوند: (1) زلزله‌های با شوک منفرد (2) توالی با مضمون شوک اصلی و دامنه‌های مختلف پس‌لرزه (3) توالی ناهمگون از لرزه حوزه دور و پس‌لرزه حوزه نزدیک. تحقیق بر روی بررسی پارامترهای تغییرمکان نسبی حداکثر طبقه و تغییرمکان نسبی باقی‌مانده (پسماند) طبقه تمرکز دارد. نتایج این تحقیق نشان می‌دهد که در توالی‌های لرزه‌ای، مقدار تغییرمکان نسبی باقی‌مانده پس‌لرزه همیشه بیشتر از زلزله اصلی است. همچنین نتایج نشان‌دهنده حساسیت بیشتر سازه‌های کوتاه‌مرتبه، به تغییرمکان نسبی حداکثر طبقه در پس‌لرزه، نسبت به سازه‌های بلندمرتبه است. مقدار تشدید تغییرمکان نسبی باقی‌مانده برای حالات توالی ناهمگون برای سازه‌های کوتاه‌مرتبه بیشتر از حالات بلند‌مرتبه است. همچنین در هر سه حالت اعمال زلزله، دو طبقه آخر بیشترین تغییرمکان نسبی حداکثر و باقی‌مانده را متحمل می‌شوند که نشان‌دهنده حساسیت طبقات انتهایی سازه‌ها به بحث پس‌لرزه و توالی لرزه‌ای است. بنابراین امکان خسارت سازه تحت اثر پس‌لرزه از طبقات انتهایی سازه خیلی زیاد بوده و باید در طراحی لرزه‌ای سازه مورد توجه قرار گیرد.}, keywords_fa = {توالی‌ لرزه‌ای,قاب خمشی بتن مسلح,عملکرد غیرخطی,تغییرمکان نسبی,خسارت}, url = {https://www.jcsm.ir/article_82169.html}, eprint = {https://www.jcsm.ir/article_82169_e7796e03adc0a4e0af76bd50b8b92f24.pdf} }