@article { author = {ghiasvand, ebrahim}, title = {Investigation of effect of maximum size aggregate on properties of durability of normal concretes}, journal = {Journal of Concrete Structures and Materials}, volume = {3}, number = {1}, pages = {20-29}, year = {2018}, publisher = {Iranian Concrete Society}, issn = {2538-5828}, eissn = {2676-5969}, doi = {10.30478/jcsm.2018.60853}, abstract = {Aggregates are the major constituents of concrete and typically occupy between 60% and 80% of the concrete volume. Properties of both fresh and hardened concrete are influenced by the quality of aggregates and yet their role is often overlooked. According to studies, the permeability of concrete is the most important parameter in its durability. Several factors is effective in concrete permeability such as water to cement ratio, content, shape and texture of aggregate, type and content of cement, etc. This paper examines the effect of changes of maximum size aggregate on the durability of properties of normal concrete (with w/c = 0.55). For this purpose, after preparing the aggregate (with maximum size aggregate 9.5, 12.5, 19 and 25 mm and similar fineness modulus) and concrete, experiments were carried out on concrete including compressive strength, sorptivity, absorption, ISAT, RCPT, and RCMT. The result show that generally with decrease of maximum size aggregate increases the compressive strength of concretes and improves the durability parameters.}, keywords = {Maximum size aggregate,Fineness modulus,Permeability,Durability}, title_fa = {ارزیابی تأثیر حداکثر اندازه سنگدانه بر خواص دوامی بتن‌های معمول}, abstract_fa = {سنگدانه‌ها را می‌توان مهم‌ترین جزء بتن دانست که حدود 60 تا 80 درصد حجم بتن را به خود اختصاص می‌دهد. از این‌رو خصوصیات بتن تازه و سخت‌شده متاثر از کیفیت سنگدانه‌ها بوده اما نقش آن تاکنون مورد توجه قرار نگرفته است. بر اساس مطالعات انجام‌شده توسط محقین مختلف، می‌توان نفوذپذیری را مهم‌ترین عامل در پایایی بتن دانست. عوامل متعددی نظیر نسبت آب به سیمان، مقدار، شکل و بافت سطحی مصالح سنگی، نوع و عیار سیمان و . . . بر میزان نفوذپذیری بتن موثر است. مقاله حاضر، اثر تغییرات حداکثر اندازه سنگدانه را بر خواص دوامی بتن‌های معمول با نسبت آب به سیمان 55/0، مورد مطالعه قرار داده است. به این منظور پس از آماده‌سازی مصالح سنگی (با حداکثر اندازه دانه‌های 5/9، 5/12، 19 و 25 میلی-متر و مدول نرمی ثابت) و ساخت بتن، انجام آزمایش‌هایی چون مقاومت فشاری، جذب آب مویینه، جذب آب حجمی، جذب آب سطحی، نفوذ و انتقال تسریع‌شده یون کلر در سنین مختلف در دستور کار قرار گرفت. نتایج حاصل از این پژوهش نشان داد، به طور کلی با کاهش حداکثر اندازه سنگدانه، مقاومت فشاری بتن‌های مورد بررسی افزایش و پارامترهای دوامی آن‌ها بهبود یافته است.}, keywords_fa = {حداکثر اندازه سنگدانه,مدول نرمی,نفوذپذیری,دوام}, url = {https://www.jcsm.ir/article_60853.html}, eprint = {https://www.jcsm.ir/article_60853_9ea4c410a5ea47f9c2a9ed44c3d9d6ca.pdf} }