@article { author = {zolfagharzadeh, mohammadhossein and Farokhzad, Reza}, title = {Influence of various fibers on rheology behavior of self-compacting concrete}, journal = {Journal of Concrete Structures and Materials}, volume = {5}, number = {1}, pages = {70-91}, year = {2020}, publisher = {Iranian Concrete Society}, issn = {2538-5828}, eissn = {2676-5969}, doi = {10.30478/jcsm.2020.208280.1137}, abstract = {One of the most important issues that is of great importance in self-compacting concrete is the rheological properties of self-compacting concrete, however mechanical properties and durability also riquire significarlt considerations. The objective is to determine the maximum amount of fiber, where the workability of concrete is maintined. In this research 10 mix designs have been studied, in which one mix is considered as control and the rest contain 0.1, 0.15, 0.2 fiber percentages of steel, glass and polypropylene. The results on rheology behavior shows, when the percentage of fibers increase, the concrete efficiency decrease, and the yield stresses dynamic and static, plastic viscosity and Thixotropy increase and as a result it will reduce the rheological properties. In mixes with 0.2% polypropylene and glass fibers the minimum standard values for self-compacting concrete is reached whereas for more of fiber peruntage the self-compacting state is violated.}, keywords = {Self-Compacting Concrete,Fiber,Rheological properties,RHEOMETER}, title_fa = {بررسی تاثیر انواع الیاف در خواص رئولوژیکی بتن‌خودتراکم}, abstract_fa = {یکی از مهم‌ترین مباحثی که در بتن خودتراکم اهمیت زیادی دارد خواص رئولوژی بتن خودتراکم است اگر چه خواص مکانیکی و دوام نیز حائز اهمیت می‌باشد. به همین منظور، در این پژوهش به بررسی تاثیر انواع الیاف بر خواص رئولوژیکی بتن خودتراکم با استفاده از دستگاه رئومتر و مقایسه آن با آزمایش‌های سنتی(جریان اسلامپ، حلقه J، قیف V، جعبه L، جعبه U) پرداخته شده است. استفاده از الیاف در بتن خودتراکم باید به مقداری باشد که خواص رئولوژی بتن خودتراکم را از محدوده‌ی استاندارد خارج نکند. این بررسی بر روی 10 طرح مخلوط انجام شده است، به این صورت که یک طرح شاهد و 9 طرح، جداگانه داری الیاف‌های پلی‌پروپیلن، فولادی و شیشه در سه درصد 0/1، 0/15 و 0/2 حجم کل بتن است. نتایج این بررسی نشان می‌دهد با افزایش حجم الیاف در بتن خودتراکم باعث افزایش تنش های تسلیم دینامیکی و استاتیکی، گرانروی خمیری و تغلیظ می‌شود و در نتیجه باعث کاهش خواص رئولوژیکی خواهد شد. در طرح‌های 0/2 درصد الیاف‌ پلی‌پروپیلن و شیشه حداقل حدود EFNARC در آزمایش‌های کارایی می‌باشد و استفاده بیشتر از این نوع الیاف‌، بتن را از حالت خودتراکمی خارج می‌کند.}, keywords_fa = {بتن خودتراکم,الیاف,خواص رئولوژی,دستگاه رئومتر}, url = {https://www.jcsm.ir/article_104745.html}, eprint = {https://www.jcsm.ir/article_104745_fd973683537bab251dcc9eb18519f333.pdf} }