در چند دهه ی اخیر، مقاوم سازی ستون های بتنی و بررسی رفتار آنها تحت بار زلزله به خصوص از نقطه نظر شکل پذیری و قابلیت جذب انرژی سازه، مورد توجه قرار گرفته است. بخش قابل توجهی از این مطالعات بر محصور سازی اعضای بتنی به منظور افزایش شکل پذیری و جذب انرژی آنها در برابر نیروهای ناشی از زلزله می باشد. در این مطالعه 3 روش عمده برای مقاوم سازی ستون های بتنی شامل تقویت ستون با استفاده از ورق های FRP، استفاده از ژاکت فولادی و استفاده از ژاکت بتنی در مقاوم سازی ستون مورد بررسی و مقایسه قرار گرفته است.در این راستا مقاوم سازی ستون های بتنی تحت بارهای لرزه ای با بکارگیری تحلیل های عددی با استفاده از نرم افزارABAQUS انجام گرفت. ابتدا روش عددی با نتایج حاصل از مطالعات تجربی صحت سنجی گردید. با استفاده از نمونه هایی با متغیر های شامل مقاومت بتن، نوع الیاف و تعداد لایه های FRP برای بتن تقویت شده باFRP ، متغیر ها شامل ابعاد ورق ها، تعداد و ضخامت ورق های فولادی برای ستون های تقویت شده با ژاکت فولادی و متغیرها شامل مقاومت بتن، ابعاد پوشش بتن و اندازه تنگ و فاصله بین آنها برای ستون های تقویت شده با ژاکت بتنی، در 3 روش، میزان مقاومت، شکل پذیری و افزایش ظرفیت جذب انرژی بر اساس نتایج حاصل مورد مقایسه قرار گرفته است. نتایج بدست آمده حاکی از آن است که نمونه های تقویت شده با ورق های FRP، عمدتاً باعث بهبود در شکل پذیری شده اند. نمونه های تقویت شده با بتن اگرچه باعث بهبود قابل توجه در تحمل حداکثر مقاومت برشی شده و دامنه عملکرد خطی را ارتقاء داده اند و نیز قابلیت جذب انرژی را بهبود بخشیده اند لیکن شکل پذیری مناسبی از خود نشان نداده اند و نمونه های تقویت شده با ژاکت فولادی، ضمن بهبود در بیشینه مقاومت برشی و قابلیت جذب انرژی، شکل پذیری مناسبی را از خود نشان داده اند. در حالتی که متغیر های سه روش مقاوم سازی با بار محوری ثابت را طوری تغییر دادیم که ظرفیت باربری جانبی یکسان داشته باشند، نمونه ژاکت فولادی و بتنی شکل پذیری بهتری نسبت به نمونه تقویت شده با FRP نشان می دهند. همچنین نمونه تقویت شده با ژاکت فولادی بیشترین جذب انرژی را دارد.
In recent decades, concrete column retrofitting methods and their seismic behavior under cyclic loading, especially from ductility and energy absorption standpoints, have been extensively focused by researchers. Significant amount of this research has been allocated to confinement of concrete elements in order to advance the ductility and energy absorption capability of the concrete structures facing the forces induced by earthquake. In this study four methods of concrete column retrofitting methods, including FRP plates, steel jackets, and concrete jackets, have been assessed and thoroughly compared with each other in terms of seismic behavior advancement measurements. To achieve this objective, different retrofitting methods were simulated in ABAQUS FEA software, based on prominent finite element analysis and numerical modeling. The modeling results were verified with equivalent experimental tests which further validates the accuracy of the modeling approach. In addition, the impact of the following variables were studied using sensitivity analysis on the replicated models: Core concrete strength, texture and number of layers of FRP plates, size and thickness of steel plates, and dimensions of concrete jacket, along with diameter and placing of stirrups and bars. Strength, ductility, and energy absorption capacity of the simulated models were recorded in order to compare efficiency of each retrofitting method. Results have shown that retrofitting through FRP plates leads to increasing ductility. Retrofitting using concrete jackets, despite increasing the energy absorption capability and maximum shear strength, will not result in acceptable ductility. On the under hand steel jackets, along with improving a maximum shear strength and energy absorption ability of the element, shows promising improvement in ductility. Moreover, for the models with the same axial load and lateral load capacity, steel jacketing and concrete jacketing methods have proved to show better ductility, compared to FRP. Plus, steel jacketing resulted in the highest energy absorption capability among all the three methods under the aforementioned condition.